Elana Thomasine

My Experience With Removing Flow Restrictor From Delta Shower Head

As someone who enjoys taking long, hot showers, I was frustrated with the low water pressure of my Delta shower head. After some research, I discovered the culprit: the flow restrictor.

A flow restrictor is a small device installed in shower heads to limit the water flow rate. While this may save water, it can also cause low pressure and reduced water coverage. Luckily, removing the flow restrictor is a simple and effective solution.

How To Remove Flow Restrictor From Delta Shower Head: Step by Step Guide

Step 1: Gather Tools

You will need a pair of pliers, a flat head screwdriver, and Teflon tape.

Step 2: Remove Shower Head

Using the pliers, loosen and unscrew the shower head from the shower arm. Be careful not to scratch the finish.

Step 3: Locate Flow Restrictor

The flow restrictor is a small plastic disk located inside the shower head. It is usually located behind the screen or aerator.

Step 4: Remove Flow Restrictor

Using the flat head screwdriver, gently pry out the flow restrictor. Be careful not to damage the shower head or the flow restrictor.

Step 5: Reassemble Shower Head

Wrap Teflon tape around the shower arm threads and screw the shower head back on. Use the pliers to tighten it securely.

Top 10 Tips and Ideas on How To Remove Flow Restrictor From Delta Shower Head

1. Use warm water to soften the plastic before removing the flow restrictor.
2. Place a towel or cloth over the shower head to prevent scratches.
3. Use a toothbrush to clean the screen or aerator before reassembling the shower head.
4. Consider replacing the shower head with a high-pressure model.
5. Check local water regulations before removing the flow restrictor.
6. Be patient and gentle when removing the flow restrictor to avoid damage.
7. Use Teflon tape to prevent leaks and ensure a tight seal.
8. Try removing only part of the flow restrictor to increase water pressure without wasting too much water.
9. Consult the manufacturer’s instructions or customer service before attempting to remove the flow restrictor.
10. Enjoy your new high-pressure shower!

Pros and Cons of Removing Flow Restrictor from Delta Shower Head

Pros:

• Increased water pressure and coverage
• Improved shower experience
• Reduced frustration and wasted time

Cons:

• Potential water waste and higher utility bills
• Possible violation of local water regulations
• Voided warranty or damaged shower head

My Personal Review and Suggestion on How To Remove Flow Restrictor From Delta Shower Head

After removing the flow restrictor from my Delta shower head, I noticed a significant improvement in water pressure and coverage. My showers are now more enjoyable and efficient. However, I do recommend checking local water regulations and consulting the manufacturer’s instructions before attempting to remove the flow restrictor.

Question & Answer and FAQs

Q: Will removing the flow restrictor damage my shower head?

A: It is possible to damage the shower head if not done carefully. Use gentle pressure and the right tools to avoid scratches or cracks.

Q: Is it legal to remove the flow restrictor?

A: It depends on local water regulations. Check with your utility company or local government before removing the flow restrictor.

Q: Will removing the flow restrictor increase my water bill?

A: It may increase your water bill if you use more water, but the difference is usually negligible.